Ground Clips

EPCO’s Ground Clips are specifically designed for termination of the grounding conductor and should be used when a 10-32 hole is not pre-drilled or tapped into a metallic junction box.

Since ground clips are forced onto the junction box, EPCO recommends using a “new” ground clip instead of re-using the old ground clip. Ground clips should never be forced onto the round portion of a plaster ring or a poor electrical connection will result.

  • Excellent time and labor saving alternative to using Ground Screws.
  • Manufactured in compliance with the Restriction of Hazardous Substances (RoHS) European Directive.

INSTALLATION PROCEDURE

The correct way to install a ground clip is to feed the grounding conductor into the ground clip with the shorter part of the ground clip placed inside the junction box. Then use the flat blade of a screwdriver to force the ground clip onto the junction box to ensure a good electrical connection.

Engineered Products Company's Ground Screws and Ground Clip products are in compliance with the Reduction of Hazards Standard (RoHS) European Directive. These products either do not contain Mercury, Cadmium, Hexavalent Chromium, Polybrominated Biphenyls (PBB) or Polybrominated Diphenyl Ethers (PBDE) or contain trace elements within the allowable amount specified in the RoHS directive.

Ground Clips
Ground Clip: for 14 AWG - 12 AWG Solid Wire
Catalog Number
GC
UPC Number
10052
Order Unit
PKG
Unit Quantity
100
Unit Package
PKG
Unit Per Case
10
Total Case Quantity
1000
Min. Order Quantity
100
Ship Weight
1.00lbs.
MM Req.
Yes
Ground Clips BULK
Ground Clip (BULK): for 14 AWG - 12 AWG Solid Wire
Catalog Number
20052
UPC Number
20052
Order Unit
C
Unit Quantity
100
Unit Package
BN
Unit Per Case
1000
Total Case Quantity
1000
Min. Order Quantity
1000
Ship Weight
10.00lbs.
MM Req.
Yes

EPCO warrants that the products described herein, will be furnished free from defects in material and workmanship for 1 year. Any exceptions will be indicated on the product or packaging.

EPCO’s sole obligation for any breach of warranty under the terms herein shall be, at our option, to repair or provide replacement for the Product to which such warranty is breached, or to return all payments made with respect to such Product. Any Product(s) which are deemed to be defective must be specified by the Purchaser in a written notice to Engineered Products Company’s Warranty Department within 1 year after receipt of such goods. Under no circumstances will Engineered Products Company be liable for loss of profits or incidental, indirect, consequential or special damages of any kind beyond the replacement cost of the defective merchandise.

Engineered Products Company shall not be liable for any losses arising from governmental action, an act of God, or the result of war, riot, strikes, civil commotion, sovereign conduct, delays in delivery by carrier, or the act or conduct of any person or persons not party to or associated with Engineered Products Company.