Description
Engineered Products Company’s (EPCO) TIGER XL Temporary LED Luminaire is a low cost, energy efficient lighting solution, highly functional for use in construction and retrofit lighting applications and a recommended alternative to a Metal Halide Lamp (MHL).*
This luminaire provides 15,000 lumens of brilliant white illumination over a 360 degree outward facing area and downward. This translates to a productive work environment during building construction or major renovation projects.
ATTRIBUTES
- ETL listed for dual voltage flexibility! Ability to operate on a 120 or 277-volt circuit; provides the contractor with the ultimate flexibility on the job site.
- High lumen output of 15,000 Lumens @ 100-Watts is highly favorable compared to other competitive products in the market today.
- 35-Foot power and connectivity cord distributes higher lumen output over a broad job site area to improve productivity.
- Less labor required to hang and suspend up to four TIGER XL luminaires (maximum) over the job site.
BENEFITS
- Distributes 15,000 Lumens @ 100-Watts
- Lumen distribution: 360 degrees - outward and down.
- Impact Resistant: If dropped, luminaire continues to operate with no degradation in lumen output.
- Meets OSHA Standard 1915.82(b)(1)(2)(3); 10-Foot candles minimum.
- Meets 2023 National Electrical Code: Article 410.62 (B)(C) and 410.64 (C).
FEATURES
- No assembly required! Ready to use out of the box.
- Power cord power and connectivity configuration:
- Primary Power: 1-Foot, pre-stripped pigtail is hard-wired directly into a 120 or 277-volt circuit.
- Secondary: 35-foot power and connectivity cord powers up to four (4) TIGER XL Temporary LED Luminaires on a 120V circuit; and up to seven (7) units on a 277V circuit.
- Eliminates receptacle-based connections; removes the possibility of energizing a 120-volt power tool when operating on a 277-Volt circuit.
- “Snap-Lock” hang hook expedites job site installation, folds flat for storage or transportation to the next job site.
- Required maintenance: None.
Part Numbers
More Details
Product Spec
| TIGER XL Temporary LED Luminaire Specifications | |
| Lumen Output | 15,000 |
| Operating Voltage | Hardwire directly into 120 or 277-volt circuit |
| Amperes | 1.0 @ 120V; 0.5 @ 277V |
| Lumens per Watt (lm/W) | 100-Watts |
| Power Cord Type | 16/3 SJTW Power Cord |
| Color Temperature | 5000K |
| Color Index | 80 (non-dimmable) |
| Total Connectivity |
|
| Application | Dry or Damp Environment |
| Operating Temperature | -4ºF (-20ºF) to 104ºF (40ºFC) |
| Cage | Stainless Steel |
| Certification | ETLus |
| Warranty | 5 Years at L70 |
Dimensions
Warranty
Engineered Products Company (herein known as EPCO) warrants at its sole option, after a failure is confirmed as a true defect in materials or workmanship, EPCO will replace or refund, the following TIGER XL Temporary LED Luminaire for a period of five (5) years from original purchase. This warranty statement applies to the original purchaser and is not transferable. The Original Purchaser is identified as the first initial installation completed by the Building Owner. If the product fails before the 5-year period expires, please return this product with your original invoice to: Engineered Products Company, Attention: Return Materials Department, 5401 Smetana Drive, Minnetonka, Minnesota 55343.
This Limited Warranty does not apply to any of the following:
- Any TIGER XL Temporary LED Luminaire that was incorrectly installed by drilling holes, puncturing, piercing or any other means that will alter the product’s integrity.
- Damage caused by the use of parts, components, and/or other equipment(s) that is not compatible, suitable, or unauthorized by EPCO for use with any TIGER XL Temporary LED Luminaire.
- Damage resulting from the use of any TIGER XL Temporary LED Luminaire in what EPCO, at its sole discretion, considers extreme applications.
- Product damage as determined by EPCO to be caused by a crash, impact, or obvious signs of abuse to any TIGER XL Temporary LED Luminaire.
