Description
Engineered Products Company’s (EPCO) Pre-Fabricated Power Equipment Whips (PEW) are ideal for use with electrical equipment where flexibility, protection from liquids, vapors, or solid materials is required for operations in moist or wet environments.
Manufactured in 1/2” flexible non-metallic conduit and available in either 4- or 6-foot lengths that offer exceptional crush proof qualities, these “labor-saving” PEWs are ready to install as a viable option when used to connect a power source to a variety of equipment(s) or devices that need a secure electrical connection. In addition, our PEWs can be used in hazardous locations or for direct burial applications.
We also build "custom" Power Equipment Whips to your specifications in any length or wire gauge size using UL Listed components. Contact our Inside Sales Department (800.336.1976 or sales@engproducts.com) for more specific information.
CONTRACTOR BENEFITS
- Pre-assembled in our manufacturing facility using UL Listed or UL Recognized components.
- Ready for immediate installation.
- Provides superior protection in hazardous locations and hostile environments including sunlight, heat, oil, and chemical degradation.
- Easily connects two (2) or more devices, enables efficient, cost effective transfer of electrical power from one device to the other.
- Durable and abrasion resistant. Suitable for direct burial or concrete encasement applications.
- Includes UL Listed straight and 90-degree liquid tight connectors on each end of the PEW to prevent and eliminate moisture.
CONTRACTOR ADVANTAGES
- Provides superior protection in hazardous locations and hostile environments including sunlight, heat, oil, and chemical degradation.
- Offers a substantial amount of environmental protection from corrosion, water infiltration, dust, and is resistant to vibration, bending and crushing.
- A cost-effective and efficient alternative to traditional labor-intensive pipe and wire installation methods.
- Permitted for use by virtually all local building codes and approved by electrical inspectors in the majority of municipalities across the U.S.
- Liability insurance is provided in the event of product defect(s) that may cause potential liability to the contractor.
TYPICAL APPLICATIONS
- Heat Pumps
- Compressors Motors
- Swimming Pool Devices, and similar Equipment
- Indoor/Outdoor Industrial or Commercial Grade Equipment
- Mining Operations
- Printing Production Presses
- Electrically Driven Hydraulic Presses
- Fluid Management Systems
- Industrial Enclosures and Assemblies
- Submersible Pumping Equipment
- Robotic Arc Welding Equipment
- Electric Grinding Equipment Conveyors
- Food Processing Equipment
- Air Conditioning and HVAC Units
- Pool and Spa use
Part Numbers
More Details
More Details
More Details
More Details
Product Spec
| POWER EQUIPMENT WHIPS SPECIFICATIONS | |
| Operating Voltage | 20 Amps; Compatible with 120-Volt or 240-Volt Line Circuits |
| Conductors | 12 AWG THHN (19 Strand) Conductors |
| Temperature Rating | 80°C (176°F) dry or 60°C (140°F) wet Note: This includes the ampacity (current) from the circuit conductors. |
| Applications | Rated for outdoor applications and direct burial or concrete encasement applications. |
| Standard UL Listed 1/2" Liquid Tight Connectors | Conduit Type: Flexible Non-Metallic Conduit, Type LFNC-B Construction, Flame Retardant Color: Gray Material: PVC (Poly-vinyl Chloride) with integral reinforced member within conduit wall Bend Radius: 24" |
| Compliance Requirements | National Electrical Code Articles: 2023 National Electrical Code: Articles 310.10(C)(G)(2)(3) and (4), Table 310.12(A), 350.10(1)(2) and (3), 350.22(A), 350.30(A), 356.10, 356.20, 440.6 and 443.31. UL: 1660/CSA C22.2 No. 227.2.1 |
Warranty
EPCO warrants that the products described herein, will be furnished free from defects in material and workmanship for 1 year. Any exceptions will be indicated on the product or packaging.
EPCO’s sole obligation for any breach of warranty under the terms herein shall be, at our option, to repair or provide replacement for the Product to which such warranty is breached, or to return all payments made with respect to such Product. Any Product(s) which are deemed to be defective must be specified by the Purchaser in a written notice to Engineered Products Company’s Warranty Department within 1 year after receipt of such goods. Under no circumstances will Engineered Products Company be liable for loss of profits or incidental, indirect, consequential or special damages of any kind beyond the replacement cost of the defective merchandise.
Engineered Products Company shall not be liable for any losses arising from governmental action, an act of God, or the result of war, riot, strikes, civil commotion, sovereign conduct, delays in delivery by carrier, or the act or conduct of any person or persons not party to or associated with Engineered Products Company.
