Description
Engineered Products Company’s (EPCO) TIGERcub LED Temporary Luminaire is a low cost, energy efficient, temporary LED lighting solution for construction sites, renovation, or short-term maintenance tasks. Our high quality, high performance, reliable, and durable 100-watt or 150-watt LED luminaire provides 360 degrees of illumination.
BENEFITS
- No assembly required! Ready to use out of the box.
- Small size, light weight, and easy to use.
- Lower power consumption and significant energy savings for 24 hour a day usage compared to other temporary LED luminaires.
- No lamp maintenance required.
- Minimum operating temperature -20 to 40° C (-4° to 104°F).
- Meets 2023 National Electrical Code Article 410.62(B)(C) and 410.64 Article C.
- Meets OSHA Compliance Standard 1926.56(a) for Temporary Lighting: 30-foot spacing for minimum of 5-foot-candles.
FEATURES
- Omni-directional luminaire; directs 100% of the light outward and downward.
- Weighs just 6 pounds — highest lumen output to weight ratio on the market.
- Suitable for dry and damp locations:
- Dry Locations are not normally subjected to dampness or wetness. A location classified as dry may be temporarily subject to dampness or wetness, as in the case of a building under construction.
- Damp Locations are protected from weather and not subject to saturation with water or other liquids but subject to moderate degrees of moisture.
- Durable stainless-steel cage with no risk of color fading, rusting or distorting.
- Cord Length: 5-Feet (1.8m)
- Cord Type: 18 AWG SJTW with NEMA 5-15 Plug
- NEMA 5-15 Receptacle allows luminaires to be daisy-chained together.
- Carabiner Style Hang Hook expedites installation to rebar or pipe.
-
Input Voltage: 120 VAC @ 60 Hz only
Part Numbers
More Details
More Details
Product Spec
| TIGERcub Temporary LED Luminaire Performance Specification | ||
| P/N: 15722 | P/N: 15723 | |
| Output Lumens | 13,000 | 22,500 |
| Power Consumption | 100-Watts | 150-Watts |
| Amperes | .83 | 1.6 |
| Operating Voltage | 120-Volts only | 120-Volts only |
| Power Factor | ≥.9 | ≥.9 |
| Color Temperature | 5000K | 5000K |
| Color Rendering Index (CRI) | >80 | >80 |
| L70 Lumen Depreciation** | 50,000 Hours | 50,000 Hours |
| Efficacy | 120 Lumens/Watt | 150 Lumens/Watt |
| Operating Temperature | -4°F (-20°C) to 104°F (40°C) | -4°F (-20°C) to 104°F (40°C) |
| LED Circuit Boards | Eight (8) 26-LED Circuit Boards | Eight (8) 26-LED Circuit Boards |
| Environments | Dry or Damp Environments | Dry or Damp Environments |
| Warranty | 5-years | 5-years |
| Power Cord Type | 5-foot 18 AWG SJTW Round Cord with NEMA 5-15 Plug and Receptacle | |
| Linkable Maximum | 6 Maximum | 4 Maximum |
| Certifications |
| |
| *Caution: Engineered Products Company's TIGERcub LED Temporary Luminaire, including its housing, power cord, LED driver, and internal wiring meet all ETLus product certification requirements from our factory. | ||
| *Warning: Any modification to this luminaire will immediately void the warranty. Subsequent modification can potentially cause a fire, great bodily injury (e.g., electric shock or burns), or equipment damage. | ||
| **Usable light level, the point at which the TIGERcub LED Temporary Luminaire has dimmed to 70% of its original lumen output. | ||
| ***Measured as "luminous efficacy", the rate of luminous flux being distributed out (in lumens to electricity in watts. | ||
Warranty
Engineered Products Company (herein known as EPCO) warrants at its sole option, after a failure is confirmed as a true defect in materials or workmanship, EPCO will replace or refund, the TIGERcub Temporary LED Luminaires for a period of five (5) years from original purchase. This warranty statement applies to the original purchaser and is not transferable. If the product fails before the 5-year period expires, please return this product with your original invoice to: Engineered Products Company, Attention: Return Materials Department, 5401 Smetana Drive, Minnetonka, Minnesota 55343.
This Limited Warranty does not apply to any of the following:
- Any TIGERcub Temporary LED Luminaires that was incorrectly installed by drilling holes, puncturing, piercing or any other means that will alter the product’s integrity.
- Damage caused by the use of parts, components, and/or other equipment(s) that is not compatible, suitable, or unauthorized by EPCO for use with any TIGERcub Temporary LED Luminaires.
- Damage resulting from the use of any TIGERcub Temporary LED Luminaires in what EPCO, at its sole discretion, considers extreme applications.
- Product damage as determined by EPCO to be caused by a crash, impact, or obvious signs of abuse to any TIGERcub Temporary LED Luminaires.
